CLASS F900 Archivi

Sorry, this entry is only available in Italian.

Richiedi Maggiori Informazioni

Canale Funnel

Il sistema FUNNEL viene solitamente fornito in barre da 6 metri, ma questa lunghezza è personalizzabile. I prezzi di listino si riferiscono ad un metro lineare di prodotto completo. Tale sistema viene fornito smontato. i collettori utilizzati sono di tipo SN8 kN/ m2. Su richiesta è possibile preventivare un sistema con collettori SN16 kN/m2.

Garantisce il rapido e sicuro smaltimento delle acque piovane che insistono nelle grandi superfici, come autostrade ed aeroporti, riducendo l’impatto visivo dei tradizionali sistemi a risposta delle esigenze estetiche dei progettisti
È costituito da una serie di moduli con forma ad imbuto in ghisa sferoidale provvisti di griglia superiore sempre in ghisa sferoidale
È provvisto di moduli che possono innestarsi tramite un manicotto cilindrico di Ø110 ad un collettore inferiore (2 moduli per metro lineare), di diametro variabile da Ø250 a Ø1200
Garantisce altissime performance idrauliche e sicurezza: l’acqua ha un punto di scarico ogni 1/2 metro, quindi, da un punto di vista idraulico, il sistema non entrerà mai in crisi
È fornito in barre da 6 metri che possono essere collegate tra di loro in maniera semplice, tramite un sistema di manicotto e guarnizione, tale da renderlo flessibile e veloce da installare
È affidabile essendo stato progettato seguendo le linee guida della norma di riferimento EN 1433
È ideale per utilizzi pesanti in vaste aree come autostrade, centri logistici, banchine di porti, piste di aeroporti, quindi, idoneo per le classi di carico dalla D 400 alla F 900
È completato da pozzetti di scarico sifonati
È composto da una gamma di 13 collettori di diverso diametro: Ø250, Ø315, Ø350, Ø400, Ø465, Ø500, Ø580, Ø630, Ø700,Ø800, Ø930, Ø1000, Ø1200
Il sistema è certificato dall’ente terzo IGQ secondo la norma EN 1433 ed è dotato della Dichiarazione di Conformità CE.
Richiesta di Brevetto per invenzione industriale depositata.

Wing Channel

Steel frame 25mm high with a 4.5mm wide edge subject to traffic. The frame which houses the grating allows for easy installation. Suitable for installations up to Load Class F 900

In line with the EN 1433 standard, it can support 4 Load Classes: C 250, D 400, E 600, F 900
Consists of one, HDPE channel with galvanised or stainless steel reinforcement frame
It is compact since the frame is anchored perfectly to the channel body. The frame is made of material resistant to corrosion due to contact with the surrounding environment and with the gratings; the anchorage is insured against deformation caused by shear or torsional stress
Ensures greater protection against wear and is made stronger by a frame that provides an edge subject to traffic that is 4 mm thick, and a 2 mm thick contact surface, as specified by the EN 1433 standard for classes subjected to heavy loads
Guarantees greater simplicity and accuracy with installation because the edge indicates the exact level needed for the paving
Consists of a wide range of standard gratings, with slits, square mesh and heel safety mesh, made of galvanized steel, stainless steel, ductile iron; blind covers in galvanized steel and ductile iron and a specially-designed cover for composting plants
It boasts a series of gratings with longitudinal L- and T-shaped slits and inspection chambers, with high traffic duty type D 400, which are not attached to the channel, but have a hook-and-loop linking system
The system includes an innovative grating for self-draining asphalt in D 400 which has slits in the top and side parts and can receive the fluids coming from the road, either directly from the road surface or from the draining asphalt
It features finger and screw anchoring systems
It is ideal for medium to heavy use, areas used for trade fairs, multi-storey car parks, road carriageways, parking areas, service areas, industrial estates, port and airport areas and areas for loading and unloading containers
Includes models with reduced dimensions (h 40, h 55 and h 80) perfect for installation in indoor industrial sites at ground-floor level and that require protection of the channel edge during polishing
It includes 100/55 and 100/80 models featuring reduced dimensions thanks to the flat bottom, onto which, where necessary, you can screw the practical discharge nozzle, available in two versions: Ø100 and Ø110
The system is completed with siphon drainage wells
It consists of a range of 11 channels with 3 widths and 6 heights: 100/55, 100/80, 100/100, 100/160, 150/40, 150/100, 150/160, 200/40, 200/100, 200/160, 200/250
The range also boasts a WING 300 channel, with reinforcement frames in ductile iron 1.5 metres in length and useful dimensions of 300 x 300 mm, designed for drainage over wide areas

Slope Channel

Steel frame 20 mm high with a 4mm wide edge subject to traffic. The frame which houses the grating allows for easy installation and is designed for the inclusion of anchoring clamps as an accessory. Suitable for installations up to Load Class E600.

In line with the EN 1433 standard, it can support 3 Load Classes: C 250, D 400, E 600
Consists of one, HDPE channel with galvanised or stainless steel reinforcement frame
Novelty: range includes the possibility of fitting the “Draining Slope” frame
It is compact since the frame is anchored perfectly to the channel body. The frame is made of material resistant to corrosion due to contact with the surrounding environment and with the gratings; the anchorage is insured against deformation caused by shear or torsional stress
Ensures greater protection against wear and is made stronger by a frame that provides an edge subject to traffic that is 4 mm thick, and a 2 mm thick contact surface, as specified by the EN 1433 standard for classes subjected to heavy loads
Guarantees greater simplicity and accuracy with installation because the edge indicates the exact level needed for the paving
Consists of 1 type of grating with 20 mm slits, made of ductile iron
The grating is anchored by the innovative hook-lock system to which the finger kit must be added if the E 600 version is used
To achieve more effective anchoring between the concrete and the channel, one can ask for a kit which includes eight anchoring clamps
It is ideal for private car parks, pavements, canalisation systems along the roadside and parking areas, road crossings suited for vehicles at moderate speeds, service areas, industrial estates and port areas
Includes models with reduced dimensions (h 55 and h 80) perfect for installation in indoor industrial sites at ground-floor level and that require protection of the channel edge during polishing
It includes 100/55 and 100/80 models featuring reduced dimensions thanks to the flat bottom, onto which, where necessary, you can screw the practical discharge nozzle, available in two versions: Ø100 and Ø110
The system is completed with siphon drainage wells
It consists of a range of 9 channels with 3 widths and 5 heights: 100/55, 100/80, 100/100, 100/160, 150/100, 150/160, 200/100, 200/160, 200/250

Smart Channel

Steel frame 20 mm high with a 2.5 mm wide edge subject to traffic. The frame which houses the grating allows for easy installation. Suitable for installations up to Load Class C250.

In line with the EN 1433 standard, it can support 2 Load Classes: B 125, C 250
Consists of one, HDPE channel with galvanised or stainless steel reinforcement frame
It is compact since the frame is anchored perfectly to the channel body. The frame is made of material resistant to corrosion due to contact with the surrounding environment and with the gratings; the anchorage is insured against deformation caused by shear or torsional stress
Ensures greater protection against wear and is made stronger by a frame with an edge that allows traffic to cross and is 2.5 mm thick, and also a 1.2 mm thick contact surface
Guarantees greater simplicity and accuracy with installation because the edge indicates the exact level needed for the paving
Consists of 3 types of gratings: with slits, square mesh and heel safety mesh, made of galvanized steel, stainless steel and ductile iron
It features the classic finger anchoring system
It is ideal for private car parks, pavements, canalisation systems along the roadside and parking areas, and transverse canalisations (road crossings) suited for vehicles at low speeds
Includes models with reduced dimensions (h 55 and h 80) perfect for installation in indoor industrial sites at ground-floor level and that require protection of the channel edge during polishing
It includes 100/55 and 100/80 models featuring reduced dimensions thanks to the flat bottom, onto which, where necessary, you can screw the practical discharge nozzle, available in two versions: Ø100 and Ø110
The system is completed with siphon drainage wells
It consists of a range of 9 channels with 3 widths and 5 heights: 100/55, 100/80, 100/100, 100/160, 150/100, 150/160, 200/100, 200/160, 200/250

VIP Channel

The HDPE edge which is 20 mm high (35 mm for the VIP 300) and houses the grating allows for easy installation. Suitable for installations up to Load Class C250.

In line with the EN 1433 standard, it can support 3 Load Classes: A 15, B 125, C 250
Consists of one channel made totally of HDPE with 20 mm-high containment edge requiring no reinforcement frame
Ensures protection for gratings thanks to the HDPE edge
Guarantees greater simplicity and accuracy with installation because the edge indicates the exact level needed for the paving
Consists of a wide range of gratings, with pins, slits, square mesh and heel safety mesh, made of galvanized steel, stainless steel, ductile iron and HDPE with a blind cover also in HDPE
It boasts a series of gratings with longitudinal L-shaped slits with average traffic duty type C 250, which are not attached to the channel, but have a hook-and-loop linking system and respective inspection chambers
It features the classic finger attachment system whereas the gratings in HDPE have a practical side interlocking system through a tab contained in the gratings
It is ideal for civil uses, pedestrian areas, private car parks, pavements, canalisation systems along the roadside and parking areas, sports facilities, synthetic running tracks and athletics fields
Includes models with reduced dimensions (h 40, h 55 and h 80) perfect for installation in indoor industrial sites at ground-floor level and above
It includes 100/55 and 100/80 models featuring reduced dimensions thanks to the flat bottom, onto which, where necessary, you can screw the practical discharge nozzle, available in two versions: Ø100 and Ø110
The system is completed with siphon drainage wells
It consists of a range of 11 channels with 3 widths and 6 heights: 100/55, 100/80, 100/100, 100/160, 150/40, 150/100, 150/160, 200/40, 200/100, 200/160, 200/250
The range also boasts a VIP 300 channel, 1.5 metres in length and useful dimensions of 300 x 300 mm, designed for drainage over large areas

Skip Channel

The HDPE edge which is 20 mm high and houses the grating allows for easy installation. Suitable for installations up to Load Class C250.

In line with the EN 1433 standard, it can support 3 Load Classes: A 15, B 125, C 250
Consists of one channel made totally of HDPE with 20 mm-high containment edge requiring no reinforcement frame
Ensures protection for gratings thanks to the HDPE edge
Guarantees greater simplicity and accuracy with installation because the edge indicates the exact level needed for the paving
It maintains a broad section for drainage purposes using lightweight gratings with optimised size
It features reduced dimensions thanks to the flat bottom, onto which, where necessary, you can screw the practical discharge nozzle, available in two versions: Ø100 and Ø110
Consists of a wide range of gratings, with pins, slits, square mesh and heel safety mesh, made of galvanized steel, stainless steel, ductile iron and HDPE.
The gratings with pins and in HDPE can be fixed quickly and safely without resorting to screws but using SKIP Clips
It boasts a number of fastening systems, perfect for every need: the classic finger system, the practical SKIP Clips and a simple locking system via a projection contained in the channel. The locking system does not bind the grating to the channel
It is ideal for residential areas, sports facilities and private car parks
The system is completed with siphon drainage wells
It consists of a range of 2 channels with 1 width and 2 heights: 100/55, 100/80

Easy Channel

Flat edge. Valued for its high-quality attractive finishes, as the channel is not visible from above because it is covered entirely by the grating. Suitable for installations up to Load Class C250.

In line with the EN 1433 standard, it can support 3 Load Classes: A 15, B 125, C 250
Consists of one channel made totally of HDPE requiring no reinforcement frame
Consists of 4 types of gratings: with pins, slits, square mesh and heel safety mesh, made of galvanized steel, stainless steel and ductile iron
It boasts a series of gratings with longitudinal T-shaped slits and inspection chambers, with average traffic duty type C 250, which are not attached to the channel, but have a hook-and-loop linking system
It features the classic finger anchoring system and, for the h 40 channels, the practical angular system
It is ideal for civil and domestic uses, pedestrian areas, private car parks, pavements, canalisation systems along the roadside and parking areas
It is perfect for all situations where you need to achieve high-quality aesthetic finishes as the gratings rest directly on the contact surface of the channel covering it completely
Includes models with reduced dimensions (h 40, h 55 and h 80) perfect for installation in indoor industrial sites at ground-floor level and above
It includes 100/55 and 100/80 models featuring reduced dimensions thanks to the flat bottom, onto which, where necessary, you can screw the practical discharge nozzle, available in two versions: Ø100 and Ø110
The system is completed with siphon drainage wells
It consists of a range of 11 channels with 3 widths and 5 heights: 100/55, 100/80, 100/100, 100/160, 150/40, 150/100, 150/160, 200/40, 200/100, 200/160, 200/250

FLAT Channel

Flat edge. Valued for its high-quality attractive finishes, as the channel is not visible from above because it is covered entirely by the grating. Suitable for installations up to Load Class C250

In line with the EN 1433 standard, it can support 3 Load Classes: A 15, B 125, C 250
Consists of one channel made totally of HDPE with 20 mm-high containment edge requiring no reinforcement frame
Ensures protection for gratings thanks to the HDPE edge
Guarantees greater simplicity and accuracy with installation because the edge indicates the exact level needed for the paving
Consists of a wide range of gratings, with pins, slits, square mesh and heel safety mesh, made of galvanized steel, stainless steel, ductile iron and HDPE with a blind cover also in HDPE
It boasts a series of gratings with longitudinal L-shaped slits with average traffic duty type C 250, which are not attached to the channel, but have a hook-and-loop linking system and related inspection chambers
It features the classic finger attachment system whereas the gratings in HDPE have a practical side interlocking system through a tab contained in the gratings
It is ideal for civil uses, pedestrian areas, private car parks, pavements, canalisation systems along the roadside and parking areas, sports facilities, synthetic running tracks and athletics fields
Includes models with reduced dimensions (h 40, h 55 and h 80) perfect for installation in indoor industrial sites at ground-floor level and above
It includes 100/55 and 100/80 models featuring reduced dimensions thanks to the flat bottom, onto which, where necessary, you can screw the practical discharge nozzle, available in two versions: Ø100 and Ø110
The system is completed with siphon drainage wells
It consists of a range of 11 channels with 3 widths and 6 heights:100/55, 100/80, 100/100, 100/160, 150/40, 150/100, 150/160, 200/40, 200/100, 200/160, 200/250
The range also boasts a VIP 300 channel, 1.5 metres in length and useful dimensions of 300 x 300 mm, designed for drainage over large areas

Plus Channel

Steel frame 25mm high with a 4.5mm wide edge subject to traffic. The frame, which is equipped with 8 anchoring clamps and houses the grating, allows for easy installation. Suitable for installations up to Load Class F 900

In line with the EN 1433 standard, it can support 4 Load Classes: C 250, D 400, E 600, F 900
Consists of one, HDPE channel with galvanised or stainless steel reinforcement frame
It boasts a galvanized steel or stainless steel one-piece frame with 8 external anchoring clamps (4 on each side) for anchoring to the concrete and 2 spacers that guarantee stability against torsional deformation
Ensures greater protection against wear and is made stronger by a frame that provides an edge subject to traffic that is 4 mm thick, and a 2 mm thick contact surface, as specified by the EN 1433 standard for classes subjected to heavy loads
Guarantees greater simplicity and accuracy with installation because the edge indicates the exact level needed for the paving
Consists of a wide range of standard gratings, with slits, square mesh and heel safety mesh, made of galvanized steel, stainless steel, ductile iron; blind covers in steel and ductile iron and a specially-designed cover for composting plants
The system includes an innovative grating for self-draining asphalt in D 400 which has slits in the top and side parts and can receive the fluids coming from the road, either directly from the road surface or from the draining asphalt
It features finger and screw anchoring systems
It is ideal for heavy uses, road carriageways, road crossings suited for vehicles crossing at high speeds (also suited for heavy goods vehicles), service areas, industrial estates, port and airport areas and areas for loading and unloading containers
Includes models with reduced dimensions (h 55 and h 80) perfect for installation in indoor industrial sites at ground-floor level and that require protection of the channel edge during polishing
It includes 100/55 and 100/80 models featuring reduced dimensions thanks to the flat bottom, onto which, where necessary, you can screw the practical discharge nozzle, available in two versions: Ø100 and Ø110
The system is completed with siphon drainage wells
It consists of a range of 9 channels with 3 widths and 5 heights: 100/55, 100/80, 100/100, 100/160, 150/100,150/160, 200/100, 200/160, 200/250
The range also boasts a PLUS 300 channel, with frame in galvanized steel 1.5 metres in length and useful dimensions of 300 x 300 mm, designed for drainage over wide areas

MUFLEDRAIN

ASVOX

PRATO

SUOLO

ACE

MUFLEDRAIN

ASVOX

PRATO

SUOLO

ACE

MUFLEDRAIN

ASVOX

PRATO

SUOLO

ACE

MUFLEDRAIN

ASVOX

PRATO

SUOLO

ACE

SEARCH BY CODE

CLASSI DI CARICO

FAMIGLIA PRODOTTI

larghezza

altezza

disegno griglia

materiale griglia

LOAD CLASSES

PRODUCT FAMILY

width

height

grid design

grid material

CLASS F900 - Plus Channel

PLUS CHANNEL

CLASS F900 - Wing Channel

WING CHANNEL